Back

Send to a friend

Print

Homepage

Sitemap

Group 39. Plastics and articles thereof Tariff item Description of goods Units of quantity Rate of duty Group 39  Plastics and articles thereof         I. Primary forms     3901  Polymers of ethylene, in primary forms:     3901 10  – polyethylene having a specific gravity of less than 0.94:     3901 10 100 0  – – linear polyethylene – 15 3901 10 900 0 – – other – 0,5 3901 20 – polyethylene having a specific gravity of 0.94:     3901 20 100 0 – – one of the mentioned in the 6b annotation to given group form polyethylene, available density 0,958 or more at 23°C and containing: aluminium 50 mg/kg or less, calcium 2 mg/kg or less, chromium 2mg/kg or less, iron 2 mg/kg or less, nickel 2 mg/kg or lss, titanium 2 mg/kg or less, and vanadium 8 mg/kg or less, for production of sulfochlorinated polyethylene – 0,5 3901 20 900 0 – – other – 0,5 3901 30 000 0 – ethylenevinyl acetate copolymers – 0,5 3901 90   – other:     3901 90 100 0 – – inomer polymers consisting of salts of threefold sopolymers of etylene izobutilcrilate and metocryl acids  – 0,5 3901 90 200 0 – – A – B – A block – sopolymer of polystyrol, sopolymer of ethylenebutylene and polystyrol, contenting 35% or less by weight of styrol, in one of kinds, spescified in note 6b to this chapter – 0,5 3901 90 900 0 – – other – 0,5 3902  Polymers of propylene or of other olefins, in primary forms:     3902 10 000 0 – polypropylene – 0,5 3902 20 000 0 – polyisobutylene – 0,5 3902 30 000 0 – propylene copolymers – 0,5 3902 90   – other:     3902 90 100 0 – – A – B – A block – sopolymer of polystyrol, sopolymer of ethylenebutylene and polystyrol, contenting 35% or less by weight of styrol, in one of kinds, spescified in note 6b to this chapter – 0,5 3902 90 200 0 – – sopolymers of polybutil-1-ene, but-1-ene and ethylene, contenting 10%by weight or less of etylene polyethylene of (polybutil-1-ene or mixed with polypropylene; contenting 10%by weight or less of polyethylene and/or 25% or less of polypropylene specified in note 6b of this chapter) in one  – 0,5 3902 90 900 0 – – other – 0,5 3903  Polymers of styrene, in primary forms:       – Polystyrene:     3903 11 000 0 – – expansible – 0,5 3903 19 000 0 – – other – 0,5 3903 20 000 0 – styreneacrylonitrile (SAN) copolymers – 0,5 3903 30 000 0 – acrylonitrilebutadienestyrene (ABS ) copolymers – 0,5 3903 90  – other:     3903 90 100 0  – – copolymers of only styrene and allyl alcohol, 175 or more in acetyl pieces   – 0,5 3903 90 200 0 – – bromated polystyrene with brom in contents   58 mass% or more , but not above 71 mass%, indicated in the item 6b of this group – 0,5 3903 90 900 0 – – other – 0,5 3904  Polymers of vinyl chloride or of other halogenated olefins, in primary forms:     3904 10 00 – Polyvinyl chloride, not mixed with any other ubstances:     3904 10 001 0 – – pasteforming polyvinylchloride emulsive tar (containing by weight 0.2% of water; 0.1% emulgator(salts of aliphate and carbon acids); 0.1% of alkali; 06% of viniylchloride) by chemical pressing of foam layer high-durable with transparent layer ("InavilEP-724”, “Solvik367NU”, InavilEP-705”)  – 0,5 3904 10 009 0 – – other – 0,5   – other polyvinyl chloride:      3904 21 000 0 – – nonplasticised – 0,5 3904 22 000 0 – – plasticised – 0,5 3904 30 000 0 – vinyl chloridevinyl acetate copolymers – 0,5 3904 40 000 0 – other vinyl chloride polymers – 0,5 3904 50  – vinylidene chloride polymers:     3904 50 100 0 – – sopolymers of acrilonitryl and vinyldenchlorid in grainy shapes of diameter 4 mkm or more, but not excedeeng 20mkm – 0,5 3904 50 900 0 – – other – 0,5   – Fluoropolymers:     3904 61 000 0 – – Polytetrafluoroethylene – 0,5 3904 69  – – other:     3904 69 100 0 – – – polyvinylfluorite oin ine of the forms indicated in the item 6b of this group. – 0,5 3904 69 900 0 – – – other – 0,5 3904 90 000 0 – other – 0,5 3905  Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms:       – Polyvinyl acetate:     3905 12 000 0  – – dispersed in water – 0,5 3905 19 000 0 – – dispersed in water – 0,5   – Vinyl acetate copolymers:     3905 21 000 0 – – dispersed in water – 0,5 3905 29 000 0 – – other – 0,5 3905 30 000 0 – polyvinyl alcohols, whether or not containing unhydrolyzed acetate groups – 0,5   – other:     3905 91 000 0 – – copolymers – 0,5 3905 99  – – other:     3905 99 100 0 – – – in one of forms specified in note 6b to this chapter , of specific gravity 10 000 or more, but not excedeeng 40 000, polyvinylformal contenting 9.5% by weight or more, but not excedeeng 13% in calculation regarding vinylasetat spirit and 5% by weight, but no more than 6.5% hydroxyl group – 0,5 3905 99 90 – – – other:     3905 99 901 0 – – – – polyvinylpirrolydon – 0,5 3905 99 909 0 – – – – other – 0,5 3906  Acrylic polymers in primary forms:     3906 10 000 0 – polymethyl methacrylate – 0,5 3906 90  – other:     3906 90 100 0 – – poly[N – (3 – hydroxiimin – 1,1 – dimethylbuthyl)acrylamide] – 0,5 3906 90 200 0 – – sopolymers of 2 – diizopropylaminoethylmetacrylat and desilmetacrylat(contenting 55%by weight or more of sopolimers) in solution of N,N – dimethylasetamid – 0,5 3906 90 300 0 – – sopolymers of 2 – diizopropylaminoethylmetacrylat and desilmetacrylat(contenting 55%by weight or more of sopolimers) in solution of N,N – dimethylasetamid – 0,5 3906 90 400 0 – – sopolymer of acryl acid and 2 – ethylhecsylocrylat, contenting 10% by weight ormore, but not excedeeng 11% of 2– ethylhecsylocrylat – 0,5 3906 90 500 0 – – polymerization solutions used in weaving print paint  – 0,5 3906 90 600 0 – – rhreefold sopolymer of methylacrylat, ethylen and monomer,    not having carboxyl group as an substitutive – group, containing 50% by weight or more of metyacrylat, mixed or not nmixed with asetat of cilicium – 0,5 3906 90 900 0 – – other – 0,5 3907  Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms:      3907 10 000 0 – polyacetals – 0,5 3907 20 – other polyethers:       – – Polyether alcohols:      3907 20 110 0 – – – polyethylene glycols – 0,5   – – – other:     3907 20 210 0 – – – – with a hydroxyl number not exceeding 100 – 0,5 3907 20 290 0 – – – – other – 0,5   – – other:     3907 20 910 0 – – – ethylen oxide and 1 – chlor – 2,3 – epoxypropan copolymers – 0,5 3907 20 990 0 – – – other – 0,5 3907 30 000 0 – epoxide resins – 15 3907 40 000 0 – polycarbonates – 0,5 3907 50 000 0 – alkyd resins – 0,5 3907 60 – Polyethylene terephthalate:     3907 60 200 0 – – of typical dencity 78ml/g – 0,5 3907 60 800 0 – – other – 0,5 3907 70 000 0 – poly(lactic acid) – 0,5   – other polyesters:      3907 91 – – Unsaturated:     3907 91 100 0 – – – liquid – 0,5 3907 91 900 0 – – – other – 0,5 3907 99 – – other:       – – – with a hydroxyl number not exceeding 100:     3907 99 110 0 – – – – polyethylenenaphtalene – 2,6 – dicarbroxilat – 0,5 3907 99 190 0 – – – – other – 0,5   – – – other:     3907 99 910 0 – – – – polyethylenenaphtalene – 2,6 – dicarbroxilat – 0,5 3907 99 980 0 – – – – other – 0,5 3908  Polyamides in primary forms:     3908 10 000 0 – polyamide 6,11, 12, 6,6, 6,9, 6,10 or 6,12 – 0,5 3908 90 000 0 – other – 0,5 3909  Amino – resins, phenolic resins and polyurethanes, in primary forms:     3909 10 000 0 – urea resins, thiourea resins – 0,5 3909 20 000 0 – melamine resins – 0,5 3909 30 000 0 – other aminoresins – 0,5 3909 40 000 0 – phenolic resins – 0,5 3909 50  – polyurethanes:     3909 50 100 0 – – polyuretan, sopolymer of 2,2-(tret-butilimino)diethanol and 4'4-methylendisicolgexildiizocionate in solution of N,N-dimethylasetamyd, containing 50% or more polymer – 0,5 3909 50 900 0 – – other – 0,5 3910 00 000 0  Silicones in primary forms – 0,5 3911  Petroleum resins, coumarone – indene resins, poly – terpenes, polysulfides, polysulfones and other products specified in note 3 to this chapter, not elsewhere specified or included, in primary forms:     3911 10 000 0 – petroleum resins, coumarone, indene or coumaroneindene resins andpolyterpenes – 15 3911 90 – other:       – – condensation or rearrangement polymerisation products, whether or not chemically modified:     3911 90 110 0 – – – polyoxy-1,4 -phenylenesulfonyl-1,4- phenyleneoxy-1,4 - phenyleneizoprophylydine-1,4 phenylene indicated in the item 6b of this group – 0,5 3911 90 130 0 – – – polityo – 1,4 – fenylene – 0,5 3911 90 190 0 – – – other – 0,5   – – other:     3911 90 910 0 – – – sopolymers of n– crezol and divinylbenzole (contenting 50% by weight of more of polymer) in the solution of N,N– dimetylasetamyn – 0,5 3911 90 930 0 – – – sopolymer of hydrotized vinyltoluol and a – methylsteryn – 0,5 3911 90 990 0 – – – other – 0,5 3912  Cellulose and its chemical derivatives, not else– – where specified or included, in primary forms:       – Cellulose acetates:     3912 11 000 0 – – non – plasticised  – 0,5 3912 12 000 0 – – plasticised – 0,5 3912 20 – Cellulose nitrates (including collodions):       – – non – plasticised:     3912 20 110 0 – – – collodions and celloidin – 0,5 3912 20 190 0 – – – other – 0,5 3912 20 900 0 – – plasticised – 0,5   – Cellulose ethers:     3912 31 000 0 – – carboxymethylcellulose and its salts – 15 3912 39  – – other:     3912 39 100 0 – – – ethylcellulose – 0,5 3912 39 200 0 – – – hydropropycellulose – 0,5 3912 39 800 0 – – – other – 0,5 3912 90 – other:     3912 90 100 0 – – cellulose esters – 0,5 3912 90 900 0 – – other – 0,5 3913 – – Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms:     3913 10 000 0 – alginic acid, its salts and esters – 0,5 3913 90 000 0 – other: – 0,5 3914 00 000 0  Ionexchangers based on polymers of heading 3901 to 3913, in primary forms – 0,5    II. Waste, parings and scrap; semi– – manufactures; articles     3915  Waste, parings and scrap, of plastics:     3915 10 000 0 – of polymers of ethylene – 0,5 3915 20 000 0 – of polymers of styrene – 0,5 3915 30 000 0 – of polymers of vinyl chloride – 0,5 3915 90 – of other plastics:       – – of compounds of polymers:     3915 90 110 0 – – – of polymers of propylene – 0,5 3915 90 180 0 – – – other – 0,5 3915 90 900 0 – – other: – 0,5 3916  Monofilament of which any cross – sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface – worked but not otherwise worked, of plastics:     3916 10 000 0 – of polymers of ethylene – 10 3916 20 – of polymers of vinyl chloride:     3916 20 100 0 – – of polyvinylchloride – 10 3916 20 900 0 – – other – 10 3916 90 – of other plastics:       – – Of Condensation or rearrangement polymerisation products whether or not chamically modified :     3916 90 110 0 – – – of polyesters – 10 3916 90 130 0 – – – of polyamides – 10 3916 90 150 0 – – – of epoxide resins – 10 3916 90 190 0 – – – other – 10   – – of added polymerisation products:      3916 90 510 0 – – – of polymers of propylene – 10 3916 90 590 0 – – – other – 10 3916 90 900 0 – – other – 10 3917  Tubes, pipes and hoses and fittings therefore (for example, joints, elbows, flanges), of plastics:     3917 10  – Artificial guts (sausage casings) of hardened protein or of cellulosic plastics materials:     3917 10 100 0 – – of hardened protein – 15 3917 10 900 0 – – of cellulose materials – 15   – Tubes, pipes and hoses, rigid:     3917 21 – – Of polymers of ethylene:     3917 21 100 0 – – – seamless and of a length exceeding the maximum crosssectional dimension whether or not surfaceworked but not otherwise worked – 15 3917 21 900 – – – other:     3917 21 900 1 – – – – with fittings attached, for use in civil aircraft – 0,5 3917 21 900 9 – – – – other – 15 3917 22 – – Of polymers of propylene:     3917 22 100 0 – – – seamless and of a length exceeding the maximum crosssectional dimension, whether or not surfaceworked but not otherwise worked – 15 3917 22 900 – – – other:     3917 22 900 1 – – – – with fittings attached, for use in civil aircraft – 0,5 3917 22 900 9 – – – – other – 15 3917 23 – – Of polymers of vinyl chloride:     3917 23 100 0 – – – seamless and of a length exceeding the maximum crosssectional dimension, whether or not surfaceworked but not otherwise worked – 15 3917 23 900 – – – other:     3917 23 900 1 – – – – with fittings attached, for use in civil aircraft – 0,5 3917 23 900 9 – – – – other – 15 3917 29  – – Of other plastics:       – – – Seamless and slice Of a length exceeding the maximum cross – sectional dimension, whether or not surface – worked, but not otherwise worked     3917 29 120 0 – – – – of condensation or rearrangement polymerisation products whether or not chemically modified  – 15 3917 29 150 0 – – – – of addition polymerisation products – 15 3917 29 190 0 – – – – other – 15 3917 29 900 – – – other:     3917 29 900 1 – – – – with fittings attached, for use in civil aircraft – 0,5 3917 29 900 9 – – – – other – 15   – Other tubes, pipes and hoses:     3917 31 000 – – Flexible tubes, pipes and hoses, having a minimum burst pressure of 27.6 MPa:     3917 31 900 1 – – – with fittings attached, for use in civil aircraft – 0,5 3917 31 900 9 – – – other – 15 3917 32 – – Other, not reinforced or otherwise combined with other materials, without fittings:       – – – Seamless and slice Of a length exceeding the maximum cross – sectional dimension, whether or not surface – worked, but not otherwise worked :     3917 32 100 0 – – – – of Condensation or rearrangement polymerisation products whether or not chemically modified  – 15   – – – – of addition polymerisation products:      3917 32 310 0 – – – – – of polymers of ethylene – 15 3917 32 350 0 – – – – – of polymers of vinyl chloride – 15 3917 32 390 0 – – – – – other – 15 3917 32 510 0 – – – – other – 15   – – – other:     3917 32 910 0 – – – – artificial sausage casings – 15 3917 32 990 0 – – – – other – 15 3917 33 000 – – Other, not reinforced or otherwise combined with other materials, with fittings:     3917 33 900 1 – – – with fittings attached, for use in civil aircraft – 0,5 3917 33 900 9 – – – other – 15 3917 39 – – other:       – – –   Seamless and slice of a length exceeding the maximum cross – sectional dimension, whether or not surface – worked, but not otherwise worked :     3917 39 120 0 – – – – of Condensation or rearrangement polymerisation products whether or not chemically modified  – 15 3917 39 150 0 – – – – of addition polymerisation products – 15 3917 39 190 0 – – – – other – 15 3917 39 900 – – – other:     3917 39 900 1 – – – – with fittings attached, for use in civil aircraft – 0,5 3917 39 900 9 – – – – other – 15 3917 40 000 – Fittings:     3917 40 000 1 – – – – with fittings attached, for use in civil aircraft – 0,5 3917 40 000 9 – – – – other – 15 3918  Floor coverings of plastics, whether or not self – adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter:     3918 10 – of polymers of vinyl chloride:     3918 10 100 0 – – consisting of a support, impregnated, coated or covered with polyvinyl chloride m2 15 3918 10 900 0 – – other m2 15 3918 90 000 0 – of other plastics m2 15 3919  Self – adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls:      3919 10 – In rolls of a width not exceeding 20 cm:       – – strips, the coating of which consists of unvulcanised natural of syntetic rubber:     3919 10 110 0 – – – of plasticised polyvinyl chloride or polyethylene – 15 3919 10 130 0 – – – of nonplasticised polyvinyl chloride – 15 3919 10 150 0 – – – of polypropylene – 5 3919 10 190 0 – – – other – 5   – – other:       – – – of condensation of rearrangement polymerisation products, whether or not chemically modified:     3919 10 310 0 – – – – of polyesters – 5 3919 10 380 0 – – – – other – 5   – – – of addition polymerisation products:     3919 10 610 0 – – – –   mastication polymers of vinyl chloride or polyethylene  – 5 3919 10 690 0 – – – – other – 5 3919 10 900 0 – – – other – 5 3919 90  – other:     3919 90 100 0 – – further worked than surfaceworked, or cut to shape other than rectangle(including square) – 5   – – other:       – – – of condensation of rearrangement polymerisation products, whether or not chemically modified:     3919 90 310 0 – – – – of polycarbonates, alkyd resins, polyallyl esters or other polyesters – 5 3919 90 380 0 – – – – other – 5   – – – of addition polymerisation products:     3919 90 610 0 – – – – of plasticised polyvinyl chloride or polyethylene – 5 3919 90 690 0 – – – – other – 5 3919 90 900 0   – – – other – 5 3920  Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials:     3920 10 – of polymers of ethylene:       – – of a thickness not exceeding 0.125 mm:       – – – of polyethilen, with special wheight:       – – – – less than 0.94:     3920 10 230 0 – – – – – pelicle of polyethylene of 20mkm wide or more but not excedeeng 40mkm for obtaining photorubber pelicle for production of semiconductor or printing scheme  – 15   – – – – – other:       – – – – – – not printed:     3920 10 240 0 – – – – – – – elongated pelicle – 15 3920 10 260 0 – – – – – – – other – 15 3920 10 270 0 – – – – – – printed – 15 3920 10 280 0 – – – – 0.94 or more – 15 3920 10 400 0 – – – other – 15   – – of a thickness exceeding 0.125 mm:     3920 10 810 0 – – – synthetic paper mass in wet sheet form, derivated from untied thinly divarecated fibrils of polyethylene, mixed or not mixed with fibers of selulose not excedeeng 15%, contenting polyvinyl spirit attenuated in water as moisting mediator – 0,5 3920 10 890 0 – – – other – 15 3920 20 – of polymers of propylene:       – – of a thickness not exceeding 0.10 mm:     3920 20 210 0 – – – with biaxial orientation – 15 3920 20 290 0 – – – other – 15   – – of a thickness exceeding 0.10 mm:       – – – Strip of a width exceeding 5 mm but not exceeding 20 mm, used for packaging :     3920 20 710 0 – – – – decorative strip – 15 3920 20 790 0 – – – – other – 15 3920 20 900 0 – – – other – 15 3920 30 000 0 – of polymers of styrene – 0,5   – of polymers of vinyl chloride:      3920 43 – –   containing plasticises not less than 6% by weight:     3920 43 100 0  – – – of a thickness not exceeding 1 mm – 15 3920 43 900 0 – – – of a thickness exceeding 1 mm – 15 3920 49  – – other:     3920 49 100 0 – – – of a thickness not exceeding 1 mm – 15 3920 49 900 0 – – – of a thickness exceeding 1 mm – 15   – Of acrylic polymers:      3920 51 000 0 – – of polymethyl methacrylate – 15 3920 59  – – other:     3920 59 100 0 – – – esther pelicle of sopolymers of acryl and metacryl acids of wide not excedeeng 150mkm – 15 3920 59 900 0 – – – other – 15   – of Polycarbonates, Alkyd resins, polyallyl esters or Other polyesters :     3920 61 000 0 – – of polycarbonates – 15 3920 62 – – of polyethylene terephthalate:       – – – of a thickness not exceeding 0.35 mm:     3920 62 110 0 – – – – pelicle of polyethyleneterephtalat of thickness 72mkm or more, but not excedeeng 79mkm, for production of flexible magnetic disks – 0,5 3920 62 130 0 – – – – pelicle of polyethyleneterephtalat of thickness100 mkm or more but not exedeeng 150 mkm for production of print photopolymer plates – 0,5 3920 62 190 0 – – – – other – 15 3920 62 900 0 – – – of a thickness exceeding 0.35 mm – 15 3920 63 000 0 – – of unsaturated polyesters – 15 3920 69 000 0 – – of other polyesters – 15   – of cellulose or its chemical derivatives:     3920 71 – – of regenerated cellulose:     3920 71 100 0 – – – Sheets, film or strip, coiled or not of a thickness of less than 0.75 mm – 15 3920 71 900 0 – – – other – 15 3920 73  – – of cellulose acetate:     3920 73 100 0 – – – film in rolls or in strips for cinematography or photography – 15 3920 73 500 0 – – – sheets, film or strip, coiled or not, of a thickness of less than 0.75 mm – 15 3920 73 900 0 – – – other – 15 3920 79 – – of other cellulose derivatives:     3920 79 100 0 – – – Of vulcanized fiber – 15 3920 79 900 0 – – – other – 15   – of other plastics:     3920 91 000 0 – – of polyvinyl butyral – 15 3920 92 000 0 – – of polyamides – 15 3920 93 000 0 – – of aminoresins – 15 3920 94 000 0 – – of phenolic resins – 15 3920 99  – – of other plastics:       – – – of condensation of rearrangement polymerisation products, whether or not chemically modified:     3920 99 210 0 – – – – polyimid sheets, strip or belt, coated or not coated, or coated by plastic – 15 3920 99 280 0 – – – – other – 15   – – –   of addition polymerisation products:     3920 99 510 0 – – – – polyvinylflor sheets – 15 3920 99 530 0 – – – –   ion metabolisming membranes of plastics for use in chloralkali electrolysisers – 15 3920 99 550 0 – – – – pellicle of polyvinyl spirit byoxal oriented, without coating, contenting 97%by weight of polyvinyl spirit or more, of thickness not excedeeng 1mm – 15 3920 99 590 0 – – – – other – 15 3920 99 900 0 – – – other – 15 3921  other plates, sheets, film, foil and strip, of plastics:       – cellular:     3921 11 000 0 – – of polymers of styrene – 15 3921 12 000 0 – – of polymers of vinyl chloride – 15 3921 13 – – of polyurethanes:     3921 13 100 0 – – – flexible – 15 3921 13 900 0 – – – other – 15 3921 14 000 0 – – of regenerated cellulose – 15 3921 19 000 0 – – of other plastics – 15 3921 90 – other:       – – of condensation of rearrangement polymerisation products, whether or not chemically modified:       – – – of polyester :     3921 90 110 0 – – – – corrugated sheet and plates – 15 3921 90 190 0 – – – – other – 15 3921 90 300 0 – – – of phenolic resins – 15   – – – of amides' tar:       – – – – with layes :     3921 90 410 0 – – – – – highpressure laminates with a decorative surface on one or both sides – 15 3921 90 430 0 – – – – – other – 15 3921 90 490 0 – – – – other – 15 3921 90 550 0 – – – other – 15 3921 90 600 0 – – of addition polymerisation products – 15 3921 90 900 0 – – other – 15 3922  Baths, shower baths, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics:     3922 10 000 0 – baths, showerbaths and washbasins – 15 3922 20 000 0 – lavatory seats and covers – 15 3922 90 000 0 – other – 15 3923  Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics:     3923 10 000 0 – boxes, cases, crates and similar articles – 15   – Sacks and bags (including cones):     3923 21 000 0 – – of polymers of ethylene – 15 3923 29 – – of other plastics:     3923 29 100 0 – – – of polyvinyl chloride – 15 3923 29 900 0 – – – other – 15 3923 30 – carboys, bottles, flasks and similar articles:     3923 30 10  – – of a capacity not exceeding 2 litres:     3923 30 101 0  – – – preforms – 15 3923 30 109 0 – – – other – 15 3923 30 90 – – of a capacity exceeding 2 litres:     3923 30 901 0 – – – preforms – 15 3923 30 909 0 – – – other – 15 3923 40 – Spools, cops, bobbins and similar supports:     3923 40 100 0 – – tapes and identical materials, cassettes for magnetic tapes, classified as of headings 8523 and 8524, wheels and similar articles – 15 3923 40 900 0 – – other – 15 3923 50 – Stoppers, lids, caps and other closures:     3923 50 100 0 – – caps and capsules for bottles – 15 3923 50 900 0 – – other – 15 3923 90 – other:     3923 90 100 0 – – netting extruded in tubular form – 15 3923 90 900 0 – – other – 15 3924  Tableware, kitchenware, other household articles and toilet articles, of plastics:     3924 10 000 0 – tableware and kitchenware – 15 3924 90 – other:       – – from reclaimed selulose:     3924 90 110 0 – – – sponges – 15 3924 90 190 0 – – – other – 15 3924 90 900 0 – – other – 15 3925  Builders' ware of plastics, not elsewhere specified or included:     3925 10 000 0 – reservoirs, tanks, vats and similar containers, of a capacity of exceeding 300 l – 15 3925 20 000 0 – doors, windows and their frames and thresholds for doors – 15 3925 30 000 0 – shutters, blinds (including Venetian blinds) and similar articles and parts thereof – 15 3925 90 – other:     3925 90 100 0 – – fittings and mounting intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings – 15 3925 90 200 0 – – main, channel and cable chutes for electric circuits – 15 3925 90 800 0 – – other – 15 3926  Other articles of plastics and articles of other materials of headings 3901 to 3914:     3926 10 000 0 – office or school supplies – 15 3926 20 000 0 – articles of apparel and clothing accessories (including gloves) – 15 3926 30 000 0 – fittings for furniture, coachwork and the like – 15 3926 40 000 0 – statuettes and other ornamental articles – 15 3926 90 – other:     3926 90 500 0 – – perforated buckets and similar articles used to filter water at the entrance to drains – 15   – – other:     3926 90 910 0 – – – made from sheet – 15 3926 90 980 – – – other:     3926 90 980 1 – – – – rubber only for refregerators – 0,5 3926 90 980 9 – – – – other – 15

Send to a friend       Print

Homepage      Sitemap